CubeX Error 007

Error 007

Ready SW ERR / Ready switch Malfunction 

1. Removed completly hand or footswitch from  port and re-insert . 

As shown in the picture, if there is no error code when disconnecting the cable, the cable needs to be replaced.

If error code is generated after cable removal, OP BOARD defect , please contact support 

When damage is confirmed visually, replacement is required , Please contact support. 

2 . Replace the hand switch ,  if the error keeps occuring contact support. 

• Related Articles

• Specs Sheets

  Specs Sheets

• How to input P data Values CubeX

• Error 032

  Error 032 It can occur when X-ray exposure within 10 seconds Or when turning the power on or off within 10 seconds "CLT cooling time will be applied" 1. Verify the unit is plugged directly to an outlet and not a switch or extender. 2. Turn Unit Off ...

• Simplified CubeX Veterinary Technique Chart

  Simplified CubeX Veterinary Technique Chart

• Seasoning video for portable generators

  CubeX Warm-up Video https://youtu.be/2Cok47G4Hk0