Dicom Send Examvuo DUO

Dicom Send Examvuo DUO


DICOM SEND
Send Multiple Images

1. Select Patient
2. Select PACS ICON on the right Columm for multiple Dicom images




Send One Image

1. Select  Patient
2. Select Icon on the Bottom list 
3. Select Image to send . 
 



4. Select Dicom location
5. Select Send.









    • Related Articles

    • Dicom Error

      1. Dicom error. 2. Clear Dicom error and Re-send Image Select Red Arrow Select AbortALL 3. resend image if error continues go to Step 4. 4. Verify the Dicom destination is correct. 5. Select Setting-PACS-PACSServer-Echo If you get an echo error means ...

    • CubeX Integration with ExamVue Duo Vet

      Step 1 Set up USB cable ( A-B Type) 2.0 Type 2. Conect USB Cable between Computer and Rear side of the CubeX. a. Computer b. CubeX Portable 2. Install CubeX Drivers Click “ update Drivers” Drivers installed completely 3. After set-up, please verify ...

    • Setting up Presets for Examvue Duo Vet

      Step 1 a. Open Management Software b .Login with Admin Credentials c. Username-admin Password- admin Select the Preset TAB Create a Name Create a Description Select SAVE Select Animal Type , the body part and projection. Repeat as needed Finish- Exit ...

    • Examvue DUO Veterinary User Manual

      Examvue DUO Veterinary User Manual

    • Quick Installation Guide DX Panel 17x17 Tethered

      1. Components 2. Hardware Connection 3. Open ExamVue Duo Acquisition Software. 4. Login Click “Login“ after entering the password “admin” 5. Register a Patient. Enter “ ID” , “Name”,”Sex”,”DOB” Click Save and Click Next 1. Select Body Part 2. Select ...